Introducing the world’s first OEM-spec logo puddle light units for the Ford Fiesta, designed, engineered and exclusively released by Car Enhancements UK. Developed from the ground up to replace the factory units, these are not generic stick-on projectors — they are true replacement modules built to OEM standards.
This isn’t just another puddle light.
When you open the door, the logo is projected cleanly onto the ground, delivering a premium factory-plus look that genuinely stands out at night.
These units are engineered to look and fit like they came from the factory — because that’s exactly how we designed them.
Choose from 12 different projection colours, allowing you to match:
Whether you want subtle white or something bold and eye-catching, the choice is yours.
✔ Ford Fiesta MK7 & MK7.5 (See FAQ Below)
✔ Model years 2013–2017
✔ ST & ST-Line variants
Please note this product Will Not Fit the mirrors with a recessed unit and OEM Logo projector, this is a completely different housing! Please see photo for guidance of what fits and what does not!
(Designed as a direct replacement for factory puddle light locations)
We don’t rebrand off-the-shelf parts. These puddle lights were designed exclusively for the Fiesta platform, tested in-house, and refined to meet OEM expectations.
This is a true CEUK exclusive, built for owners who want something genuinely different — not something everyone else already has.
When your Fiesta makes an entrance, make sure it does it properly.
🟨 CEUK Logo Puddle Light Units – OEM fit. World first. Exclusive.
This product is protected by a registered UK design (Design No. 6497663).
The external housing, lens positioning, mounting geometry, and overall visual appearance of these vehicle puddle light units have been independently designed and developed by Car Enhancements UK and are protected under UK registered design law.
Design protection is claimed for the appearance of the product as illustrated, covering the distinctive OEM-style replacement form and physical configuration.
Any unauthorised copying or sale of products that reproduce the same or substantially similar appearance may constitute an infringement of our registered design rights.
These puddle light units are a world-first CEUK design and are exclusive to Car Enhancements UK.
No, Unfortunately if your vehicle does not have puddle lights this unit can not be fitted. Is it not a retrofit unit but a replacement for the OEM single colour puddle light.
You can however retrofit mirrors to the vehicle which do have puddle lights in, which will then enable you to have this product. You would need to purchase the mirror housings, Modules and wiring looms. This can become quite expensive, requires knowledge of this type of work and may also require coding to the vehicle.
This kit will only fit vehicles that do not currently have the Logo puddle lights – So if you have puddle lights, but theyre just white you are fine. We have attached a photo to the listing to show the compatibility! If you have the none compatible mirrors this unit will not fit!
Yes. Unfortunately as standard the puddle lights on this vehicle is hard wired into the vehicle wiring loom, and does not have a clip to be able to disconnect the factory unit from the car. As a result, we have made the kit very simple to install, and its a simple case of Disconnect the battery, Strip the mirror down, Cut 2 wires and connect our units via the supplied wire connectors!
Yes, We have made an extensive step by step fitting video which is available on youtube to show you how to install this product.
To install this kit you require a Trim Removal tool, A T20 Torx Bit, a set of Wire Cutters and an optional set of wire strippers (You can use the cutters to strip the cable if you are comfortable.
This product will not cause any canbus errors or dash lights on the vehicle once installed correctly!
Yes, thanks to our Luminos Film tint technology incoroprated into the unit, we can supply replacement films at a later date to change the colour of the logo projection if required!
Not only are the Ford full mirror units hugely expensive, but the logo is not as bright and as crisp as our unit, and the colour can not be changed on the Ford unit!
Yes.
Puddle lights are courtesy/entry lighting only and are not part of the vehicle’s forward lighting system.
They do not affect MOT testing when fitted and operating correctly.
No.
The lights operate only when the vehicle unlocks or doors are opened and draw minimal current, comparable to the factory units they replace. They automatically switch off with the vehicle.
Yes.
The projection is symmetrical, so these units work correctly on both left-hand-drive and right-hand-drive vehicles.
Yes.
The units use sealed housings suitable for exterior door mounting and are designed to withstand rain, road spray, and normal UK weather conditions.
We offer 12 month warranty as standard on all CEUK Products
Yes, This product was designed in house by Car Enhancements UK. These are a WORLD FIRST and CEUK EXCLUSIVE!
You can write any text to be displayed either here if you want it to show on all products or create a custom metafield for products where you can add text information specific for each product.
| Part | Size | Diameter | Width | Height | Weight |
|---|---|---|---|---|---|
| Car Tire | 17" | 215 mm | 17" | 25" | 8 kg |
| Alloy Wheel | 18" | 225 mm | 18" | 24" | 7.5 kg |
| Brake Disc | 12" | 280 mm | 12" | 15" | 3 kg |
| Exhaust Pipe | Standard | 200 mm | 150 mm | 40" | 5 kg |
$132.00